Go to the body Go to the main menu

ubiquoss

PRODUCTS

WE HAVE A DREAM AND VISION OF ALL IP CONVERGENCE

SWITCHES

OUR COMPANY HAS A DREAM AND VISION OF ALL IP CONVERGENCE

A switch is a device in a computer network that electrically and logically connects together other devices. Multiple data cables are plugged into a switch to enable communication between different networked devices. Switches manage the flow of data across a network by transmitting a received message only to the one or more devices for which the message was intended. Each networked device connected to a switch can be identified using a MAC address, allowing the switch to regulate the flow of traffic. This maximizes the security and efficiency of the network.
Essentially, when replacing a repeater hub with an Ethernet switch, the single large collision domain is split up into smaller ones, reducing the probability and scope of collisions and, as a result, increasing the potential throughput. Because broadcasts are still being forwarded to all connected devices, the newly formed network segment continues to be a broadcast domain.


Due to these features, a switch may be seen as more "intelligent" than a repeater hub, which simply retransmits messages out of every port of the hub but the receiving one, unable to distinguish different recipients, and greatly degrading the overall efficiency of the network.
ubiQuoss provides a full line of powerful, business-class ethernet switching solutions for all your network needs. Perfect for SMB and multi-site enterprise networks, ubiQuoss Ethernet Switches address today’s highest networking priorities from bandwidth expansion and VoIP migration, to network security. Choose from managed Core/edge, Aggregation, Access Switch product lines. Our ethernet switches are differentiated by their security, ease-of-use, and management features like MAC-based port security and cable diagnostics.

 

Core/Edge Switches 

 

The ubiQuoss Core/edge switches simplify the architecture for Enterprise IT managers have limited time or resources to deal with overly complex, specialized network infrastructure solutions. Purpose-built core, aggregation, edge and Data Center modules can meet the chassis needs across network. Traditional three-tier architectures can be replaced with a streamlined two-tier network that reduces management overhead, operational complexity and capital expenditures.

The ubiQuoss Core/edge switches deliver voice-class availability, Gigabit Ethernet, and 10 Gigabit Ethernet wherever it’s needed. They serve well as a high-performance Enterprise core. The non-blocking ports interconnect thousands of servers for High Performance Cluster Computing (HPCC) and data center applications. A full range of Layers 2 and Layer 3 features for IPv4 and IPv6 allow the aggregation of high-speed connections, eliminating bottlenecks between edge and core. ubiQuoss Core/edge switches fit well at the edge of the most demanding enterprises switching Voice-over-IP (VoIP), video, wireless and data traffic.

 

Aggregation Switches(Layer3) 

 

Within the LAN environment, a Layer 3 aggregation switch makes intelligent switching decisions based on the Layer 3 source and destination addresses, similar to that of a router. A standard Layer 2 switch relies on the MAC addresses to make switching decision. The fundamental difference between the two, is that a Layer 3 aggregation switch offers more performance compared to a standard Layer 2 switch.
The ubiQuoss Layer 3 aggregation switches combine performance, reliability and security. These switches are perfect for Gigabit to the desktop applications or as an aggregator switch routing between VLANs, therefore segmenting data and voice and offering additional security.

 

Access Switches(Layer2) 

 

The ubiQuoss Access Switches includes full-featured, managed, Layer 2 and Gigabit Ethernet, and Power Over Ethernet switches. Gigabit Ethernet Switches provides affordable, higher capacity switching for Gigabit-to-the-desktop applications and PoE. The Gigabit Ethernet switch is available from 8 to 24 ports and features 1G or 10G uplink capabilities for both multi-floor and campus aggregation switching needs that demand multi-layer, wire-speed switching capacity.
Business-class features, flexible management, and a favorable price point set these switches apart from all other switches in their category.

The ubiQuoss Acccess solutions are perfect for Small- and Medium-sized Businesses (SMBs) or multi-site enterprise networks. These solutions address highest networking priorities, from bandwidth expansion to network security.

Family of Gigabit Layer 2 switches

CM-8024A
Details

Overview

 

CM-8000A series is a family of Gigabit Ethernet class Layer 2 switches with built-in 10/100/1000Base-T Gigabit Ethernet ports. Each model included in this family has different number of service port and uplink module while they all use same OS. Today, demands for higher bandwidth are dramatically getting increased with the advent of various IP based services and contents such as HD grade IPTV, and VoD. In addition, more and more residential houses and complexes are equipped with optical cables, which allow maximum efficiency at affordable cost. The CM-8000A Series is designed to meet those requirements for both increasing bandwidth and affordable cost. The CM-8000A Series can accommodate various uplink interfaces such as 10G EPON, 10G Ethernet, 1G EPON, or 1G Ethernet. 

 

CM-8000A Series Switches support IPv6, Rate Limit, and hardware-based QoS, and provide mobile Internet, home network, and differentiated IP services suitable for the next-generation Internet environment.

 

The CM-8000A Series has adopted proven technologies on the software such as QoS, filtering features for security and traffic monitoring for efficient service operation. The operator can manage and monitor the CM-8000A series switches remotely, and can reset them either by manual remote reset or automatic reset if required.

 

Features of CM-8000A Series

 

●  Supports various types of uplink media
       - 10G/10G EPON
       - 1G/1G EPON
       - 10G/10G Ethernet
       - 1G/1G Ethernet
  Flexible placement options
       - 8, 16 or 24 port options are available
       - Using same OS for three models
  Supports 10/100/1000 Base-T media
  Different physical dimension
       - Convenient installation
  Supports Hardware based QoS
  Supports rate limit per port
  Provides traffic statistics
  Incorporates security via packet filtering​