Go to the body Go to the main menu

ubiquoss

PRODUCTS

WE HAVE A DREAM AND VISION OF ALL IP CONVERGENCE

SWITCHES

OUR COMPANY HAS A DREAM AND VISION OF ALL IP CONVERGENCE

A switch is a device in a computer network that electrically and logically connects together other devices. Multiple data cables are plugged into a switch to enable communication between different networked devices. Switches manage the flow of data across a network by transmitting a received message only to the one or more devices for which the message was intended. Each networked device connected to a switch can be identified using a MAC address, allowing the switch to regulate the flow of traffic. This maximizes the security and efficiency of the network.
Essentially, when replacing a repeater hub with an Ethernet switch, the single large collision domain is split up into smaller ones, reducing the probability and scope of collisions and, as a result, increasing the potential throughput. Because broadcasts are still being forwarded to all connected devices, the newly formed network segment continues to be a broadcast domain.


Due to these features, a switch may be seen as more "intelligent" than a repeater hub, which simply retransmits messages out of every port of the hub but the receiving one, unable to distinguish different recipients, and greatly degrading the overall efficiency of the network.
ubiQuoss provides a full line of powerful, business-class ethernet switching solutions for all your network needs. Perfect for SMB and multi-site enterprise networks, ubiQuoss Ethernet Switches address today’s highest networking priorities from bandwidth expansion and VoIP migration, to network security. Choose from managed Core/edge, Aggregation, Access Switch product lines. Our ethernet switches are differentiated by their security, ease-of-use, and management features like MAC-based port security and cable diagnostics.

 

Core/Edge Switches 

 

Enterprise IT managers have limited time or resources to deal with overly complex, specialized network infrastructure solutions. ubiQuoss Core/edge switches simplify the architecture. Purpose-built core, aggregation, edge and Data Center modules can meet your chassis needs across the network. Traditional three-tier architectures can be replaced with a streamlined two-tier network that reduces management overhead, operational complexity and capital expenditures.
ubiQuoss Core/edge switches deliver voice-class availability, Gigabit Ethernet, and 10 Gigabit Ethernet wherever it’s needed. They serve well as a high-performance Enterprise core. The non-blocking ports interconnect thousands of servers for High Performance Cluster Computing (HPCC) and data center applications. A full range of Layers 2 - 4 features for IPv4 and IPv6 allow the aggregation of high-speed connections, eliminating bottlenecks between edge and core. ubiQuoss Core/edge switches fits well at the edge of the most demanding enterprises switching Voice-over-IP (VoIP), video, wireless and data traffic.

 

Aggregation Switches(Layer3) 

 

Within the LAN environment, a Layer 3 aggregation switch makes intelligent switching decisions based on the Layer 3 source and destination addresses, similar to that of a router. A standard Layer 2 switch relies on the MAC addresses to make switching decision. The fundamental differences between the two, is that a Layer 3 aggregation switch offers more performance then that of a standard Layer 2 switch.
Our Layer 3 aggregation switches combine performance, reliability and security. These switches are perfect for Gigabit to the desktop applications or as an aggregator switch routing between VLANs, therefore segmenting data and voice and offering additional security.

 

Access Switches(Layer2) 

 

ubiQuoss Access Switches includes full-featured, managed, Layer 2 and Fast Ethernet, Gigabit Ethernet, and Power over ethernet switches.
Fast Ethernet switch offers up to 24 ports, as well as Gigabit uplink ports while Gigabit Ethernet Switches provides affordable, higher capacity switching for Gigabit-to-the-desktop applications and PoE. The Gigabit Ethernet switch is available from 8 to 24 ports and features 1G or 10G uplink capabilities for both multi-floor and campus aggregation switching needs that demand multi-layer, wire-speed switching capacity.
Business-class features, flexible management, and a favorable price point set these switches apart from all other switches in their category.
Our solutions is perfect for Small- and Medium-sized Businesses (SMBs) or multi-site enterprise networks. These solutions address today’s highest networking priorities, from bandwidth expansion to network security.

Gigabit L3 Switch for enterprise

E6300-48T
Details

Overview

 

E6300-48T is a Gigabit L3 switch that delivers remarkable efficiency and reliability for robust switching at the CO aggregation or campus/enterprise network edge. It is furnished with routing, multicasting, QoS (Quality of Service) functions suitable for IP-TV, mission critical data, and voice services.

 

E6300-48T is a 1U-sized switch applied for spatial efficiency and easy installation. System stability is optimized by supporting hardware based distributed switching and hot-swapping for each module, and system extension while operating is carried out without service interruption.

 

E6300-48T makes use of high-speed non-blocking switch fabric. It also supports bandwidth management and QoS; therefore, service providers can offer differentiated IP services corresponding to applied service or SLA (Service Level Agreement). E6300-48T’s hardware-based multi-routing protocols provide never-before-seen functions among existing software-based routers.

 

Features of E6300-48T

 

●  19 inch Rack mount type switch
  48 Ports 10/100/1000 Base-T
  4 Uplink port 1G/10G Combo
  1GB Main Memory
  2GB Flash Memory
  SNMP v1/v2/v3, RMON, MIB
  IGMP Snooping
  Multicast Group entry 1K
  Support IPv6 features​