SWITCHES
OUR COMPANY HAS A DREAM AND VISION OF ALL IP CONVERGENCE
A switch is a device in a computer network that electrically and logically connects together other devices. Multiple data cables are plugged into a switch to enable communication between different networked devices. Switches manage the flow of data across a network by transmitting a received message only to the one or more devices for which the message was intended. Each networked device connected to a switch can be identified using a MAC address, allowing the switch to regulate the flow of traffic. This maximizes the security and efficiency of the network.
Essentially, when replacing a repeater hub with an Ethernet switch, the single large collision domain is split up into smaller ones, reducing the probability and scope of collisions and, as a result, increasing the potential throughput. Because broadcasts are still being forwarded to all connected devices, the newly formed network segment continues to be a broadcast domain.
Due to these features, a switch may be seen as more "intelligent" than a repeater hub, which simply retransmits messages out of every port of the hub but the receiving one, unable to distinguish different recipients, and greatly degrading the overall efficiency of the network.
ubiQuoss provides a full line of powerful, business-class ethernet switching solutions for all your network needs. Perfect for SMB and multi-site enterprise networks, ubiQuoss Ethernet Switches address today’s highest networking priorities from bandwidth expansion and VoIP migration, to network security. Choose from managed Core/edge, Aggregation, Access Switch product lines. Our ethernet switches are differentiated by their security, ease-of-use, and management features like MAC-based port security and cable diagnostics.
Core/Edge Switches
The ubiQuoss Core/edge switches simplify the architecture for Enterprise IT managers have limited time or resources to deal with overly complex, specialized network infrastructure solutions. Purpose-built core, aggregation, edge and Data Center modules can meet the chassis needs across network. Traditional three-tier architectures can be replaced with a streamlined two-tier network that reduces management overhead, operational complexity and capital expenditures.
The ubiQuoss Core/edge switches deliver voice-class availability, Gigabit Ethernet, and 10 Gigabit Ethernet wherever it’s needed. They serve well as a high-performance Enterprise core. The non-blocking ports interconnect thousands of servers for High Performance Cluster Computing (HPCC) and data center applications. A full range of Layers 2 and Layer 3 features for IPv4 and IPv6 allow the aggregation of high-speed connections, eliminating bottlenecks between edge and core. ubiQuoss Core/edge switches fit well at the edge of the most demanding enterprises switching Voice-over-IP (VoIP), video, wireless and data traffic.
Aggregation Switches(Layer3)
Within
the LAN environment, a Layer 3 aggregation switch makes intelligent switching
decisions based on the Layer 3 source and destination addresses, similar to that
of a router. A standard Layer 2 switch relies on the MAC addresses to make
switching decision. The fundamental difference between the two, is that a Layer
3 aggregation switch offers more performance compared to a standard Layer 2
switch.
The ubiQuoss Layer 3 aggregation switches combine performance, reliability and
security. These switches are perfect for Gigabit to the desktop applications or
as an aggregator switch routing between VLANs, therefore segmenting data and
voice and offering additional security.
Access Switches(Layer2)
The
ubiQuoss Access Switches includes full-featured, managed, Layer 2 and Gigabit
Ethernet, and Power Over Ethernet switches.
Gigabit Ethernet Switches
provides affordable, higher capacity switching for Gigabit-to-the-desktop
applications and PoE. The Gigabit Ethernet switch is available from 8 to 24
ports and features 1G or 10G uplink capabilities for both multi-floor and
campus aggregation switching needs that demand multi-layer, wire-speed
switching capacity.
Business-class features, flexible management, and a favorable price point set
these switches apart from all other switches in their category.
The ubiQuoss Acccess solutions are perfect for Small- and Medium-sized Businesses (SMBs) or multi-site enterprise networks. These solutions address highest networking priorities, from bandwidth expansion to network security.
High performance Gigabit L3 switch
Overview
P8424FG is a high performance switch to be placed in the access segment of a metro IP network. P8424FG can support high speed broadband multimedia services covering all the levels of Layer 2/3/4. It is equipped with highly improved routing, multicasting and QoS (Quality of Service) features.
P8424FG is intended to be placed between traffic aggregation switches and a high performance backbone switch to transmit data between them, allowing enterprises and service providers to build a gigabit backbone network conveniently.
P8424FG can handle bi-directional traffics between metro switches through the layer 2/3/4 switching function, since its layer 2 switching and layer 3 routing is based on hardware. It supports full duplex communication at each port, thus the available bandwidth of a link can be doubled since full duplex communication allows simultaneous transmission of data frames.
Features of P8424FG
● High speed and high capacity service
- for service providers
● Processing high-capacity traffics
● Long distance connection based on various optical interfaces
● 48 Gbps Non-Blocking Switch Fabric
● Max. 36Mpps throughput
● 24 ports Giga Combo type
● Hot-Swapping function
● Stable hardware-based Wire-speed switching and routing
● All the ports support wire-speed
● Layer 3 switching network structure
● Wire speed Internet Protocol(IP) switching and routing